8
Setup parameters
Powers
Control menu
Currents
Password entry
Synoptic
Voltages
Information page
Alarms
Input/output state
Control thresholds
Statistics
Battery state
Events log
2.3
Password protected access
• The password is used to enable or block access to the setting menu and the command menu.
• The password is deactivated and access is free on new euipment (default). If the passwords are enabled, they must be
entered to access the euipment (the passwords are numeric).
• See
M03 Password
setting menu for how to enable and define passwords.
• There are two access levels, according to the entered code:
• User level access – it’s allowed to reset the programmable counters, limits and changing the parameters of the menu
Utilities - M01.
• Advanced level access - the same rights as the user, with the addition of being able to edit all settings.
• In the normal measurements display, press
✓
to recall the main menu, then select the password icon and press
✓
.
• The password setting window shown in the figure will appear:
• Press
▲
and
▼
to change the value of the selected digit.
• Press
◄
and
►
to go from one digit to the next.
• Enter all the digits of the password and then go to the key icon.
• The respective unlock message will appear when the entered password corresponds to the
User level password
or to the
Advanced level password
.
• After having unlocked the password, access will remain enabled until:
- the euipment is switched off.
- the euipment is reset (after closing the settings menu).
- two minutes elapse without the operator touching any button.
• Press
✓
to close password setting and exit.
2. Operating modes