17
16
Smarther
User and installation manual
Note
: a domestic Wi-Fi with internet access is needed for the connection between the Smarther and the smartphone. To use the service, the Customer must acquire the technical equipment which allows
access to the Internet, on the basis of an agreement made by the Customer himself with an ISP (Internet Service Provider). BTicino plays no part in this.
Install the dedicated Home + Control application on your smartphone to program and use the Smarther. The services offered by means of the App require being able to interact with Smarther remotely and
through the Internet. In these cases the integration and good working between Smarther and App may depend on:
– a) quality of the Wi-Fi signal;
– b) quality of the data signal;
We would like to inform you that the remote use via the App involves the use of data. The cost linked to data usage depends on the type of contract which the customer has with his ISP (Internet Service
Provider) and is solely the customer’s responsibility.
Functions available and differences between newly installed Smarther and Smarther connected with App
Functions
Smarther just installed
(not connected)
Smarther connected with the App
By Smarther
By App
Settings
– Heating/cooling switch (default: heating)
– Enable touch interface (default: enabled)
– Display brightness (*) (default: automatic without
switching off)
– Heating protection temperature (default: 7 °C)
– Temperature calibration
– Beep activation (default: disabled)
– Vibration activation (default: enabled)
Program of a daily or weekly temperature
profile
Management of several Smarther and several
houses
(*) display brightness levels:
Off, Automatic without switching off, Automatic with switching off, Customised
