15
14
Smarther
User and installation manual
Technical data
Power supply
110 – 240 Vac , 50/60Hz
Absorption
2 W max
Maximum cable section
1 x 1,5mm2
Contact output
5(2) A
Operating temperature
5 – 40 °C
Setpoint temperature
5 – 30 °C heating; increase of 0,5 °C
5 – 40 °C cooling; increase of 0,5 °C
Type of operation
1BU
Pollution index
2
Rated pulse voltage
4 kV
Wireless device in compliance with 802.11b/g/n standard, frequency 2.4 – 2.4835 GHz,
transmission power < 20 dBm.
WEP/WPA/WPA2 safety protocol. IPv4 protocol.
Radio connection: short range communication, 868MHz/915MHz frequency, transmission power
< 25mW e.r.p.
Regulatory warnings
Read carefully before use and keep for future reference
Touching the units with wet hands is forbidden
Using liquid cleaners or aerosols is forbidden
Blocking the ventilation openings is forbidden
Modifying the devices is forbidden
Removing protective parts from the devices is forbidden
Installing the units near liquids and powders is forbidden
Installing the units near heat sources is forbidden
Installing the units near harmful gases, metal dusts or similar is forbidden
Fastening the units on unsuitable surfaces is forbidden
Danger of electrical shock
Risk of devices falling because the surface on which they are installed collapses
or inappropriate installation
Switch the power supply OFF before any work on the system
Caution: Installation, configuration, starting-up and maintenance must be
performed exclusively by qualified personnel.
Check that the wall installation has been carried out correctly
Lay out the wires respecting the standards in force
Connect the power supply wires as indicated
Use only the items indicated in the technical specifications for any system
expansions
