Choice RSTAT5 RF
Wireless Digital Programmable Thermostat
Installation Instructions
SERVICE AND WARRANTY
Guarantee: as shown on product identification label.
Any tampering or misuse will invalidate this guarantee.
This product must meet Waste Electronic and
Electrical Equipment Regulations (WEEE) for suitable
environmental recycling, recovery and/or disposal.
End of life products should be handled in line with local
regulations. Alternatively return end of life product to
Sangamo for correct disposal.
CUSTOMER CARE POLICY
As part of Sangamo’s continuous improvement
program, the company operates a Customer Care
policy. This means we welcome your comments and
complaints, as it can help us to improve our services
to you, our customer.
Due to our policy of continuous product improvement
and development, the specifications in this guide may
be subject to change without prior notice.
Sangamo Limited
Industrial Estate, Port Glasgow,
Renfrewshire, PA14 5XG
Tel 01475 745131
Fax: 01475 600370
Email: [email protected]
Web: www.sangamo.co.uk
WEE/JH0069TY
143882 A
TRANSMITTER
Power supply
4x AAA 1.5V alkaline batteries
Battery lifespan
1 year
Temperature adjustment range 5 to 35
°
C
Temperature adjustment scale
0.5
°
C
Temperature display range
0 to 50
°
C
Temperature display scale
0.1
°
C
Operating temperature
0 to 50
°
C
Switching differential
0.5
°
C or 1.0
°
C selectable
Clock accuracy
<1 sec per day
Protection
rating
IP30
Pollution
class
3
Flexible wire size
0.5-1.5mm
2
Rigid wire size
0.5-2.5mm
2
Dimensions
L110.8 x H104 x D21.5
Transmission frequency
868.35Mhz
ErP
Class I
RECEIVER
Power supply
230Vac 50Hz
Contact rating
16A, 250Vac (Volt free changeover contacts)
Radio
frequency
868.35Mhz
Receiver category
2
Protection
rating
IP43
Insulation
class
II
Operating temperature
-10 to 60
°
C
Storage temperature
-10 to 60
°
C
Flexible wire size
0.5-1.5mm
2
Rigid wire size
0.5-2.5mm
2
Dimensions
L88 x H88 x D39.4
Complies with
EN60730-1, EN60730-2-1, EN60730-2-7,
EN60730-2-11,
EN60950-1,
EN609501/A11,
EN12098-2,
EN12098-5,
EN301-489-3,
EN300-220-1,
EN300-220-2,
EN301-489-1
SPECIFICATIONS
This unit must be installed by a suitably qualified person in accordance
with the latest IEE Wiring Regulations.
Isolate mains supply before commencing installation. Please read all installation
instructions before proceeding.
Ensure that the fixed wiring connections to the mains supply is via a fuse rated
at not more than 16 amps and a class ‘A’ switch having a contact separation of a
minimum of 3mm in all poles.
No earth connection is required as the product is double insulated but ensure
continuity of earth throughout the system
SAFETY NOTICE
!
