Legacy Power Conversion HERYTAGE 10kVA 8kW User And Installation Manual Download Page 44 | Manualshive

Page: 44 / 48

background image

BILS-10003 rev E

43

800

Battery removal / replacement

Servicing of batteries should be performed or supervised by personnel knowledgeable of
batteries and required precautions. Keep unauthorized personnel away from batteries.

When replacing batteries in the UPS, replace with the same number and type of battery
originally supplied in the UPS.

Enersys NP18-12BFR (Legacy Part Number BAT-0373)

C&D Technologies UPS12-140 (Legacy Part Number BBAT-0065)
Enersys NP33-12 (Legacy part number BBAT-0065)
C&D Technologies UPS12-150MR (Legacy Part Number BBAT-10031)
Panasonic LC-LA1233P
Power Battery TC-1235L or PRC-1235L

When replacing batteries in the battery cabinet, replace with the same number and type of
battery originally supplied in the battery cabinet

.

Enersys NP18-12BFR (Legacy Part Number BAT-0373)
C&

D Technologies UPS12-140 (Legacy Part number BBAT-0065)

C&D Technologies  UPS12-150MR  (Legacy Part Number BBAT-10031)
Enersys NP33-12 (Legacy part number BBAT-0065)
C&D Technologies UPS12-270 (Legacy Part number BBAT-0103)
C&D Technologies  UPS12-300MR  (Legacy Part Number BBAT-10032)
C&D Technologies UPS12-310 (Legacy Part number BBAT-0122)
C&D Technologies  UPS12-350MR  (Legacy Part Number BBAT-10033)

801

Battery safety / cautions

Important Safety instructions – save these instructions
CAUTION:

Wear protective clothing and eye wear.

CAUTION:

Batteries can present a risk of electrical shock or burn from high short circuit

current. Observe proper precautions.

CAUTION:

Proper disposal of batteries is required. Refer to your local codes for disposal

requirements.

CAUTION:

Never dispose of batteries in a fire. The batteries may explode.

CAUTION:

Never open or mutilate batteries. Released electrolyte is harmful to the skin

and eyes, and may be extremely toxic.

The following precautions should be observed when working on batteries:
-

Remove watches rings and other metal objects.

-

Use tools with insulated handles.

-

Wear rubber gloves and boots.

-

Do not lay tools or metal parts on top of batteries.

-

Determine if the battery is inadvertently grounded. If so remove the source of ground.
Contact with any part of the grounded battery could result in electrical shock.

«
...
42
43
44
45
46
...
»

Summary of Contents for HERYTAGE 10kVA 8kW

















































Reviews:

No comments

Related manuals for HERYTAGE 10kVA 8kW

Brand: ONEAC Pages: 25

Brand: W Box Pages: 2

Brand: CyberPower Pages: 2

CyberShield CS75A12V3

Brand: CyberPower Pages: 2

Brand: INFOSEC UPS SYSTEM Pages: 114

Brand: Chloride Pages: 42

Power Protection Active 1000

Brand: Chloride Pages: 45

Brand: Gossen MetraWatt Pages: 2

Brand: sanyuan Pages: 7

Liebert NX 225 kVA

Brand: Vertiv Pages: 52

Liebert NXC 0060kTJ1AFN02000

Brand: Vertiv Pages: 90

Brand: Pocasa Pages: 45

Brand: Cyber Power Pages: 52

Brand: ACT Pages: 184

UPS2URM3000DC-NC-1N

Brand: V7 Pages: 21

Brand: Keatec Energy Pages: 28

Brand: Elektro-Automatik Pages: 16

Brand: Bicker Elektronik Pages: 27

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands