BILS-10003 rev E
3
SAFETY WARNINGS
IMPORTANT SAFETY INSTRUCTIONS – SAVE THESE INSTRUCTIONS
This manual is for Herytage UPS:
Horizontal Chassis 2kVA through 20kVA
DANGER:
UPS contain HAZARDOUS VOLTAGES. Because of these voltages,
installation of the system should be performed by a qualified electrician. The
electrician must install according to local and national electrical codes.
There are NO USER SERVICEABLE PARTS inside the UPS, repairs of the
system should be performed by qualified service personnel.
CAUTION:
Batteries can present a risk of electrical shock or burn from high short circuit
current. Observe proper precautions.
CAUTION:
Proper disposal of batteries is required. Refer to your local codes for disposal
requirements.
CAUTION:
A UPS contains its own energy source (batteries). Output voltage may be
present even when the UPS is not connected to an AC supply.
CAUTION:
Never dispose of batteries in a fire. Batteries may explode when exposed to
flame.
CAUTION:
Never open or mutilate batteries. Released electrolyte is harmful to the skin
and eyes, and may be extremely toxic.
CAUTION:
To reduce the risk of fire or electric shock, install this UPS in a temperature and
humidity controlled, indoor environment, free of conductive contaminants.
Ambient temperature must not exceed 40 C (104 F) without de-rating the
maximum load. Do not operate near water or excessive humidity (95% max).
CAUTION:
Do not remove or unplug the input cord when the UPS is turned on. This
removes the safety ground from the UPS and the equipment connected to the
UPS.
SYMBOLS:
Listed below are the symbols utilized on the product labels or within the
installation / user manual