15
1) Press the Menu button, until Ca.id is displayed.
2) Press the OK button.
3) Insert a three-digit number with the numbers key
4) Press the Phone call or Phone Bell within 4 seconds. Done!
2.
AL.OF
(All Off): All signals from Phone Call/Bell are not received.
1) Press the Menu button, until CALL is displayed.
2) Press the OK button.
3) With the Up(+) button
, select
„AL.OF“.
4) Press the OK button
– done!
3.
AL.On
(All on) Menu: All signals from Phone Call/Bell are received
1) Press the Menu button, until CALL is displayed.
2) Press the OK button.
3) With the Up(+) button
, select „AL.On“.
4) Press the OK button
– done!
4.
CELL
(Cell) Menu: Limit the number of Phone Calls/Bells, that receive a signal
with the handset.
(enter start and end number)
1) Press the Menu button, until CALL is displayed.
2) Press the OK button.
3) With the Up(+) button
, select „CELL“.
4) The display will show
„b001“.
5) With the Up(+) button
and the OK button, select the desired start
number
6) Press the OK button.
7) Repeat steps 4-6 for selecting the end number.
8) Press the OK button
– done!
5.
Co.rt
(Connect Ready Time): Set the Phone Call response time (time within
which the call from handset/console must be answered)
1) Press the Menu button, until Co.rt is displayed.
2) Press the OK button
3) Insert the response time (0
– 10 sec)
4) Press the OK button. Done!
6.
CA.VL
(Caller Volume): Set the volume of Phone Call.
1) Press the Menu button, until CA.VL is displayed.
2) Press the OK button
3) Insert the volume (0
– 10).
4) Press the OK button. Done!
7.
H.gid
(Handset und Console GID): Set the GID (Group ID) of handset/console
manually.
