10
1)
With the numbers key (10), enter the caller ID number.
„00“ means: call all
participants.
2)
Press "CALL" button.
3)
The signal reaches the addressee with vibration.
Call from Console to Console/Handset (1 to 1):
1)
With the numbers key (10), enter the caller ID number. „00“ means: call all
participants.
2) Press the
„TTT“ button (14). Keep pressed to talk, release to listen.
Note:
If the addressee does not pick up after the pre-set time, the ID number is
automatically reset to "00". "00" means: Talking to all participants.
5.2.5
CALL RX “ON/OFF” function
Setting the call signal of Phone Call/Bell ON/OFF.
1) Switch ON: Call signal is received.
2) Switch OFF: Call signal is not received.
5.2.6
Handset RX „ON/OFF“ function:
Setting the call signal of the handset ON/OFF.
1) Switch ON: Call from handset to console ON.
2) Switch OFF: Call from handset to console OFF.
5.2.7
Call from Handset to Console (1 to 1)
Call from Handset to Console
1) Press the "CALL" button.
2) The display will show
„HC.xx“. The last single digit flashes. Choose the
number with buttons (9) and (10). Press OK.
3) The digit for the tens flashes. Choose the number with buttons (9) and (10).
Press OK.
4) Use the PTT button: press the button to talk, release to listen.
5) The 1-to-1 conversation is only possible, if the call is answered within the
preset time (factory setting: 7 seconds).
Redial Handset to Console
1) Press the "CALL" button.
2)
The display will show „HC.xx“.
3) Use the PTT button: press the button to talk, release to listen.
5.2.8
Joint menu of Console/Handset
1.
CA.id
(Call id): Set the ID number of Phone Call/ Bell
