manualshive.com logo in svg

LeCroy PXA125, User Manual

Share
Download
LeCroy PXA125 User Manual Download Page 196

User Manual PXA125

Programming Reference 4-78

SYSTem
Subsystem

The system-related commands are not related directly to waveform
generation but are an important part of operating the PXA125. These
commands can reset or test the instrument, or query the instrument
for system information.

Keyword

Parameter Form

Default,

Low

 

Limit,High

Limit

:SYSTem

:ERRor?
:VERSion?
:IDENtification?

RESet
*RST
*IDN?

SYSTem:ERRor?

Purpose

This query will interrogate the PXA125 for programming errors.

Response to query

The PXA125 will return error code. Error messages are listed later in this manual.

SYSTem:VERSion?

Purpose

This query will interrogate the PXA125 for SCPI version.

Response to query

The PXA125 will return 1999.0.

SYSTem:IDENtification?

Purpose

This query will return instrument identification.

Response to query

The PXA125 will return a string similar to this one: 0x1570, 0x500, 0000000278. The first field is the vendor
ID, the second is the device ID and the last field the serial number of the instrument.

RESet, *RST

Purpose

This command will reset the PXA125 to factory defaults.

*IDN?

Purpose

This query will interrogate the identity of the PXA125.

Response to query

The PXA125 will return LeCroy,PXA125,0,1.0. The first field is the instrument model, the second is always
“0”, the third is for the firmware version number and the last for instrument options.

Summary of Contents for PXA125




























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands