manualshive.com logo in svg

LeCroy PXA125, User Manual

Share
Download
LeCroy PXA125 User Manual Download Page 162

User Manual PXA125

Programming Reference 4-44

FSK:FREQuency:RASTer<FM_sclk>

Purpose

This command will set the shift sample clock frequency. When set to operate in FSK mode, the PXA125 will
hop from carrier sample clock frequency to shifted sample clock frequency.

•

 

<FSK_sclk>   will set the shifted sample clock frequency for the FSK mode

Parameter type

Numeric

Parameter range

<FSK_sclk>

100e-3 to 100e6 in units of samples per second

FSK:FREQuency:RASTer?

Response and default

The PXA125 will return the present shifted sample clock frequency value. The returned value will be in
standard scientific format (for example: 1KHz would be returned as 1E3 – positive numbers are unsigned).
Default value is 80e3.

FSK:MODE{HOP|RAMPed}

Purpose

This command will select one of the FSK modes.

•

 

HOP will select non-delayed hops from carrier sclk to shifted sclk

•

 

RAMPed will select ramped shifts from carrier sclk to shifted sclk

Parameter type

Discrete

FSK:MODE?

Response and default

The PXA125 will return HOP, or RAMP depending on its present setting. Default is HOP.

FSK:RAMP:TIME<time>

Purpose

This command will set the time it takes for the sample clock frequency to ramp up and down from carrier to
shifted frequencies and back. This parameter will affect the PXA125 only when the instrument is set to
operate in ramped FSK mode.

•

 

<time>   will set the ramp up and down time

Parameter type

Numeric

Parameter range

<time>

10e-6 to 1 in units of seconds

Summary of Contents for PXA125




























































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands