MS-500 Mixed Signal Oscilloscope Option
36
ISSUED: June, 2009
MS-500-OM-E Rev C
Zooming on Your Waveforms
There are a number of ways to zoom a mix of analog and digital signals. The easiest method is to
STOP the acquisition and then simply adjust the timebase
Time/Div
and
Delay
knobs on the front
panel.
Use the Time/Div knob to change the zoom ratio, and the Delay knob to change the position.
Note:
When you adjust timebase to zoom, the position adjustment is limited by the maximum pre-trigger and post-trigger
delay adjustment available in your oscilloscope. Reference your oscilloscope manual for specifications of these delays.
You can also zoom by drawing a box with a mouse pointer around the area that you wish to
zoom. Follow these steps:
1. Select the area you wish to zoom by
drawing a box around it with a mouse
pointer.
