MS-500 Mixed Signal Oscilloscope Option
10
ISSUED: June, 2009
MS-500-OM-E Rev C
Digital Threshold Setup
– Provides the means to define a logic threshold for digital
trace calculation.
The MS-500 Hardware and Software requires no traceable calibration or adjustment. However,
the oscilloscope used with the MS-500 does require periodic calibration and adjustment.
Accessories
The following accessories are also available for use with the MS-500.
MSO-DLS-18 16
” (40.64 cm) Digital Lead Set
– You may
find an additional standard digital lead set convenient if
you have more than one device under test and do not wish
to disconnect/reconnect your cables (when using the MS-
500 on different DUTs). Inputs are labeled D0
– D17.
MSO-DLS-
36 16” (40.64 cm) Digital Lead Set
– An
additional digital lead set. This might be convenient to
have if you have more than one device under test and do
not wish to disconnect/reconnect your cables to use the
MS-500 on different DUTs. Adding this to the MS-500
enables 36 channels. Inputs are labeled D18
– D35
PK400-1
– Large gripper probe set for 0.10 inch (2.54
mm) pin pitch. Includes 10 probes with color-coded leads.
