MS-500 Mixed Signal Oscilloscope Option
22
ISSUED: June, 2009
MS-500-OM-E Rev C
You can access these dialogs at any other time by using the following steps:
1. Touch
Vertical
on the menu bar, and select one of
the four Digital traces. This turns the Digital trace
ON and opens the corresponding dialog box.
2. If the Digital trace is already ON, the trace
descriptor label is highlighted and you can
configure the setup dialog for that Digital trace.
3. The Digital trace descriptor labels contain
information about the Digital Sample Rate (top
line), the maximum number of digital samples
(bottom line), and the number of channels in the
grouping (top right).
