16
17
Open the LeakSmart app and tap
Add Devices
.
For the valve control head, use a Phillips head screwdriver to
open the battery compartment and install four AA batteries.
Connect the jack of the 9V Supply Cord to the bottom of the
valve control head. Then, plug the 9V Supply Cord into
an outlet.
CAUTION:
• Do not replace the four AA batteries with a 9V battery; this will
void the warranty.
• If the provided AC power cord isn’t long enough to reach the
outlet, be sure to replace it with a low voltage extension cord.
We recommend the LeakSmart low voltage extension cord.
Protect by LeakSmart Setup
Protect by LeakSmart Setup
1
2
3
Keep the LeakSmart valve control head connected
to the shut-off valve and place it at the installation
location, so you can verify that it is within
communication range to the hub.
Power the unit:
Battery compartment:
open with a Phillips
head screwdriver and install (4) AA batteries.
2
9V Supply Cord Jack:
plug cord into outlet after insertion.
3
Y88501PM Protect Shutoff vlv Manual_REV 9.2021.indd 16-17
Y88501PM Protect Shutoff vlv Manual_REV 9.2021.indd 16-17
9/2/21 10:20 AM
9/2/21 10:20 AM
