38
39
Dry off the metal pins and the back of the sensor.
Place the sensor in it’s location.
Confirm the banner at the top of the LeakSmart App turned
green. (System OK)
Open the valve.
Tap
Add Contact
(You may add up to 20 contacts).
Type contact’s name.
Toggle on
Email Alerts
and type the contact’s email address.
Toggle on
Text Message
alerts and type the contact’s phone
number.
Tap
Done
to save added contact(s).
Open the LeakSmart app.
Tap
Alerts .
Customize alerts to your preference.
Now that the complete system is installed, simulate a leak to test the
response.
Ensure your valve is in the open position.
Press and hold the damp cloth to the gold pins on the back of
a sensor, so that the sensor begins to beep.
If this sensor is set to
Protect
mode, confirm that the valve
closes.
Look for the banner at the top of the LeakSmart App to turn
red. Confirm that your contacts receive the email and/or text
alerts that a leak has been detected. If alerts are not received,
tap
Alerts
in the app and check that they are turned on.
Alert Setup
Adding Alert Contacts
Test Leak Simulation
Clearing Test Leaks
1
1
1
1
3
2
2
2
2
4
3
3
3
4
4
5
Y88501PM Protect Shutoff vlv Manual_REV 9.2021.indd 38-39
Y88501PM Protect Shutoff vlv Manual_REV 9.2021.indd 38-39
9/2/21 10:20 AM
9/2/21 10:20 AM
