14
15
Connect the LeakSmart Hub 3.0 to the Home Wi-Fi Network
The hub’s LED
indicator will turn blue
when successfully
connected to the
home Wi-Fi network.
14
Use a pin (or something with a thin tip) to press
and hold the factory reset button on the back of
the LeakSmart hub for fifteen-seconds.
• A purple light on top of the hub indicates that the hub is
ready for factory reset.
Turn the hub off, then back on.
The LeakSmart hub will then show up on the Wi-Fi network.
Tap
LeakSmart-XXXX
to join the network.
Performing a Factory Reset (If Needed)
2
3
4
1
1a
1a
A purple light on
top of the hub
indicates that the
factory reset is
complete.
Press and hold
the reset button to
perform a
factory reset.
1
Turn the hub
off/on.
2
Y88501PM Protect Shutoff vlv Manual_REV 9.2021.indd 14-15
Y88501PM Protect Shutoff vlv Manual_REV 9.2021.indd 14-15
9/2/21 10:20 AM
9/2/21 10:20 AM
