Leaf AFi, Quick Start Manual

Page: 98 / 128

34 Chapter 2 – Getting Started
Setting the EV Compensation
¾
Push the Meter Mode button and rotate the rear dial to select the
amount of EV compensation.
You can comp/-5 EV. EV compensation is indicated in the
viewfinder LCD as well as the handgrip LCD.
Setting the Flash Mode
Figure 22: Flash Button
¾
Push and hold the Flash button, and rotate the front dial to select one
of the following:
•
Normal Sync
: The flash is triggered immediately as the shutter
opens.
•
Rear Sync
: The flash is triggered just before the shutter closes.
Note: The Leaf AFi can use TTL flash via a Rollei SCA 3562 adapter connected to
the Flash Shoe on the side of the camera. Electronic flash can also be used by
connecting a PC cord to the Flash Sync socket or via a wireless remote device
connected to the Flash Shoe.
Setting the Flash EV Compensation
¾
Push and hold the Flash button, and rotate the rear dial to select the
desired amount of EV compensation. You can comp/-3 EV.