Camera Controls
33
Selecting the Meter Mode
Figure 21: Meter Mode Controls
1.
Move the Meter Mode switch to select the desired meter mode:
•
Average
: The exposure for the image is calculated using an average
meter reading.
•
Center-weighted light metering
: The exposure for the image is
calculated with 75% metering from the central area, and 25%
metering the remaining area.
•
Spot metering
: The exposure for the image is calculated on the
metering of a spot approximately represented by the circle in the
viewfinder.
•
Red dot—use to change the ISO setting for film: Press the Meter
Mode button, and rotate the front dial to the desired ISO.
Note:
To change the ISO for digital shooting, use the controls on the AFi
back. For more information, see
Setting the ISO
on page 38.
2.
Push the shutter release button until you reach the half-way position
and encounter light resistance.
The camera system measures the light and stores the reading as long as
the shutter release button is kept in the half-way position. At the same
time, the auto-focus is also locked.
red dot
Spot Metering
Center Weight
Average
Summary of Contents for AFi
