EM522-CAN Field bus Stepper Drive User Manual V1.0
20
Key parameter:
Address
Name
Detail
2000
Current peak
Peak current output of the drive
2001
Motor resolution
Microstep
2002
Standby time
After this time that the output
current of drive will be declined
2003
Standby current per
The holding current is equal to the
percent of dynamic current
2008
Output 1 set
The impedance-state output of the
ALM
2152
Input io functions
The functions configuration of
input1, input2, input3
2154
Input io configure
The level of the input1, input2,
input3 ports
(3) Run the motor
According to the steps in the following picture, the motor will be locked the motor shaft and ready to run.
Configure the suitable motion parameter as following picture, the motor will turn up.
