Installation and maintenance manual lba12
6
2
CONDITIONS OF USE
2.1
Environmental conditions
•
Operating temperature:
–30 °C to +55 °C
•
Maximum humidity level: 95% between
–25 °C and +40 °C, 50% above 30 °C
•
Presence of water: code AD5 (washing with water jet from all directions; notes
that high-pressure washing is possible if the jet is kept at least one metre away)
•
Presence of solid bodies: code AE4 (protection against particles larger than 1
mm)
•
Presence of corrosive substances: code AF2 plus special conditions for salt
spray and vehicle exhaust fumes. Protection against corrosion or polluting
substances is achieved through cataphoresis treatment and spray powder
painting for bodywork, by bichromate treatment for parts situated inside the case
and by the use of stainless steel for the exposed exterior parts of the barrier.
•
Mechanical constraints:
o
Impacts: code AG3
o
Vibrations: code AH2
•
Presence of flora or mould: code AK2
•
Presence of fauna: code AL2
•
Electromagnetic, electrostatic or ionising influence: code AM6
•
Sunlight: code AN2
•
Lightning: code AQ2
•
Withstands winds of more than 140 km/h
2.2
Electricity supply
The supply voltage for the barrier is 230 V ± 10%, 50 Hz ± 2 Hz monitor phase
according to NFC 15-100.
Power cuts lasting less than 100 ms will not affect operation.
2.3
Compliance with standards
The barriers comply with the following European standards:
No. 89/106/EEC
: Construction Products Directive
No. 98/37/EEC
: Machines Directive (design)
No. 72/23/EEC
: Low Voltage Directive
No. 89/336/EEC
: Electromagnetic Compatibility Directive
NF EN 61800-3 amendment A11, table 2: minimum resistance to harmonics, second
environment
NF EN 61800-3 amendment A11, tables 3 and 4: resistance to variations in voltage,
imbalance and variations in frequency, second environment
NF EN 61800-3 amendment A11, table 6: resistance to high-frequency perturbations,
second environment
NF EN 61800-3 chapters 6.1.1, 6.1.2, 6.1.3, 6.1.4: Low-frequency emissions
NF EN 61800-3 tables 6 and 7: High-frequency emissions, first environment
NF EN 61800-5-1: Adjustable speed electrical power drive systems
