Installation and maintenance manual lba12
5
1.2
Warning
Your barrier comprises a mechanism and various electrical components. Any
negligence during repair or maintenance can have serious consequences for your
safety or for that of other people. The fixed support plate is equipped with a crank
position microswitch, which prevents any movement of the mechanism when there is
no contact.
Despite this protection, the internal equipment remains live, and so we recommend
cutting the power supply by turning the switch to OFF. Be very careful when handling
internal elements that could become live or move. Remove the upper cover of the
barrier to correctly adjust the movement of the rail, both up and down, using the ends
of travel. (Previously adjusted at the factory)
1.3
Information
The installation of a barrier or a physical obstacle exposes you to liability for the safety
of users. We ask that you take the following remarks into account:
► The key that opens the door giving access to the mechanism and the electrical
part must only be used by personnel who are aware of the risks of electrocution
and crushing. Any personnel intervening on the barrier must verify that the door
is locked before departing.
► Pedestrians must not be allowed to pass through the zone of movement of the
obstacle unless this movement is effectively signalled (warning lights or sounds,
ground markings, warning sign, etc.). It is your responsibility to keep these
warnings in good condition.
The installation of adequate warning signs and their respect is your sole responsibility,
taking account of the following note:
Note: In the European Union, requirement 1.3.7.2 of the EU Machines Directive
requires a pictogram prohibiting pedestrian access to the dangerous zone to be placed
at least one metre on either side of the rail in its closed (horizontal) position.
Example pictogram:
RED
WHITE
BLACK
