LBA GROUP LBA 12 IRREVERSIBLE, Operating Instructions Manual

Page: 25 / 46

Installation and maintenance manual lba12
25
Reversibilite Option to be activated when the barrier is
reversible in order to activate the "holding
torque" function
(TRUE: activated; FALSE: deactivated)
●
Reouverture_secu Activation of the automatic reopening on
detection of a safety component (loops, IR
cell, ultrasound, etc.)
(TRUE: activated; FALSE: deactivated)
●
Param_Boost_1 Value of the boost applied to the motor
during movement %
●
Param_Boost_2 Speed below which a boost is applied to the
motor in movement Hz
●
Param_Boost_3 Value of the boost applied to the motor
during holding torque %
●
Param_Boost_4 Speed below which a boost is applied to the
motor in holding torque Hz
●
Param_Motor_1 Maximum value of the current that can be
applied to the motor during movement A
●
Param_Motor_2 Maximum value of the current that can be
applied to the motor during holding torque A
●
Param_Motor_3 Choice of the motor to control:
1: Motor 0.18kW 1.2A Bonfiglioli
2: Motor 0.25kW 1.5A Leroy Somer
3: Motor 0.55kW 3A Bonfiglioli
4: Motor 0.25kW 1.4A Bonfiglioli
●
Sens_barriere Direction of rotation of the motor
(1; -1)
●
Note: This is a default list. It can change according to the type of barrier and customer.
Important : The settings in grey must not be modify without contacting the after-sale service.
Modification of a setting:
To modify a setting in the PLC, you must:
1- Using the directional arrows and the "Enter » key, select the setting that you want to
modify. The value is displayed.
2- Press "Enter" again to be able to modify the value
3- Set the desired value using the up and down arrows.
4- Press "Enter" again to confirm
5- Then press "ESC" to return to the list of parameters
6- Press "ESC" again to exit the menu
o
"IP CONFIG" - IP address configuration:
See §5 TCP/IP Modbus Communication
=Vitesse_OUV=
70
Up(Next)/Down(Prev)
Enter => Edit value
=== USER PARAM ===
Vitesse_OUV [*]
Vitesse_FERM [ ]
Petite_vit_OUV [ ]