Step 1
Screw the outer frame together
Place the two long outer frames opposite each
other so that you can connect them to the short
frames. The outer frame with the silver
retaining screw is the rear frame..
You need:
•
2x Outer frame
•
2x Inner frame
•
4x frame connection caps
•
16x sleeve screw M4
•
16x washer M4
•
16x spring washer M4
•
16x sleeve nut M4
CONSTRUCTION
Tools
•
2x Allen key small M4
Repeat the step until you have inserted all screws. Then take the two M4 Allen keys and tighten
the screws. (One Allen key locks from the inside and the other one tightens).
The connecting caps are inserted into the
respective frames to connect all four parts.
Each side is secured with 2 screws each (16 pieces in total)
Insert the sleeve bolt including washer and spring washer* from the inside through the frame and
connect it from the outside with the sleeve nut and tighten it only by hand for the time being.
Tips from a pro:
*Sequence = sleeve screw - washer - spring
lockwasher
0
5
