PARTS
(NOT TO SCALE)
TOOLS REQUIRED
FOR ATTENTION
IMPORTANT NOTE:
PAY ATTENTION TO WIND
DIRECTION WHEN
ASSEMBLING/DISASSEMBLING
Ground Stakes (x6)
Wire rope setting-out guide (x1)
Ground Stake Puller (x1)
Base Support and Ground Spike (x1)
Poles (x5)
Star Tent
Assembly Instructions
Ensuring the ground the tent is to be pitched on is soft – use the base pole support to
mark out where the centre of the tent will be.
Slide the looped section of the wire setting rope underneath the central stake of the base
pole support and temporarily secure it into the ground
Extend the wire setting rope to full length and separate the two sections of the rope. Use the
first section of rope to mark out your first point and take the second section of the wire
setting rope and measure 4.9m across from your first point to find the second point of the tent.
www.xldisplays.co.uk
01733 511030
