![background image](http://html1.mh-extra.com/html/infinity/pole-20-x-60/pole-20-x-60_setup-instructions_2056796001.webp)
QTY
Style
5
13' Center Pole
16
8' - Side Poles
20
Ropes
20
Stakes
20
Stake Bars
20
Ratchets
Pre-Site Inspection- Call your local utitlity companies prior to installation for any underground obstructions.
1. Layout the drop cloth and tent in the location to be installed.
Omit if 1 Piece Top
Lace the tent together: A) Line up the two large center pole grommets in the middle of the tent section ( the lace end
will always be on the bottom). Starting in the middle and working out B) Pull the first lace up through the first small
grommet. C) Pull the second lace through the second grommet. D) Pull the second lace through he first lace’s loop. E)
Pull the third lace through the third grommet. F) Pull the third lace through the second lace’s loop.
Repeat steps B through F down the lace line of the tent until the third grommet from the edge of the tent is reached,
the third lace should be twice as long as all of the other loops (referred to as double loop). When the tent is laced
down to the third grommet (the double loop), pull the remaining 2 laces through the remaining 2 grommets. Loop the
second lace from the tent perimeter into the first lace ( the lace is now going towards the direction of the double loop).
Pull the third lace ( double loop) through the second loop. The third lace (double loop) should now be strung through 2
loops ( the second loop and the fourth loop). Tie-off the double loop with the fourth lace so the loops can not come loose.
Note: This does not in anyway affect the strength of the tent; it holds the sections together. A simple double knot is effective.
After lacing each section, you will need to fasten down the rain flap velcro that covers the lace line.
Repeat at all sections until the tent is completely laces together.
2. Lay out the ropes perpendictular to the tent. Drive the stakes into the ground to about 8" from the top &
6' to 7' from the tent along the rope. Tie off loosely . Make sure the tent is square. See diagram below.
Raising the Tent
3. Starting at opposite corners, Insert the side poles through the hole and leave the poles at a slight angle
so the bottom of the pole is closest to the center. Adjust the rope as needed. Continue with the other
corners & sides. Put the center pole in last.
4. Tighten all corner ropes until the corner poles are vertically straight up and down, then the side poles.
corners & sides. Put the center poles in last.
20 x 60 Pole instructions page 1 of 2
Infinity Tent Sales
20 x 60 Pole Tent Set Up Instructions
Components
Optional Items
Half Crown
Spreader T
Spreader T
L
a
c
e
L
in
e
L
a
c
e
L
in
e
L
a
c
e
L
in
e
L
a
c
e
L
in
e
L
a
c
e
L
in
e
13 ft Center
Pole
13 ft Center
Pole
13 ft Center
Pole
13 ft Center
Pole
8
f
t
S
id
e
P
o
le
Summary of Contents for Pole 20 x 60
Page 3: ... ...