Step 13
Connect the roof tent with the roof racks
You need:
•
4x mounting bracket
•
8x screws M8 45 mm
•
8x spring washer M8
•
8x washer M8
•
8x star knob screw
Lift the roof tent onto the roof rack.
Insert two screws into the aluminum profile on
each side. Then lift the tent so that one screw is
positioned to the right and one to the left of the
roof rack.
These are tightened by hand (without tools).
Then attach the four brackets in the following order:
1.
Mounting bracket
2.
Spring washer
3.
Washer
4.
Star grip screw
1
2
3
4
Notice
The mounting rails are 80 cm apart. Therefore,
you have to make sure that the free surface of
the beams must also be 80 cm apart. If this is
not the case, we offer special adapter plates.
Please contact us.
The mattress
Open the tent and unfold the Outwell
mattress*. Place it in the tent and press the two
ventilation valves inwards so that the mattress
can inflate itself.
Step 14
Tips from a professional: *For the Outwell
mattress is an instruction manual enclosed.
16
