Step 2
Install the slatted frame
You need:
•
2x outer laths, each with 2 additional holes in
the front area
•
7x inner slats
For the connection outer slats:
•
2x outer laths
•
4x screw 35 mm M4
•
4x washer M4
•
4x spring washer M4
•
4x lifting nut M4
•
4x connecting lug
For the connection inner slats:
•
7x inner laths
•
14x screw 30 mm M4
•
14x spring washer M4
•
14x nut M4
•
8 mm wrench M4
Tools
•
8 mm open-end wrench
•
5s Allen wrench
Slide the two outer laths with the pre-punched holes into the outer frame.
Make sure that the two holes point to the front.
Now slide the remaining laths into the frames,
always leaving three holes free.
Leave 3 holes free
Leave 3 holes free
Tips from the pros:
Don't give up!
0
6
