Step 3
Attach the mounting rails
You need:
•
2x mounting rail
•
18x M8 screws for mounting rail
•
18x washer M8
•
18x spring washer M8 for mounting rail
•
18x slot nuts M8 for mounting rail
(already in the rail)
Tools
•
1x Allen key M8
Place the mounting rails under the tent so that
the outer sides are flush with the frame. Slide
the sliding blocks into the correct position so
that they are under the holes.
Now connect the mounting rails to the battens.
Make sure that you have an equal overhang on
both sides. Choose the inner hole of the laths to
get 80cm width.
Slide the sliding block to the correct position.
Then insert the screw from above into the hole of the inner lath.
1. Washer M8
2. Spring washer M8
3. Screw M8
Repeat this step 18 times and tighten the screw with the 8 mm Allen
key.
1
2
3
Tips from the pro: flush - make sure the
rails don't peek over the frame on the left
or right side.
0
8
