background image

WARNING!  READ  AND  UNDERSTAND  ALL  ASSEMBLY,  INSPECTION,  &  USE  INSTRUCTIONS  PROVIDED  
BEFORE  EACH  USE.  FAILURE  TO  FOLLOW  INSTRUCTIONS  COULD  RESULT  IN  SERIOUS  INJURY  OR  DEATH.

SET-U

UP  INSTRUCTIONS:

1. Remove the ice shelter from backpack carrying bag by unzipping the bag completely.

2. Lay the ice shelter flat on the ground and be completely sure there is no material twisted or overlapping the
ends of any poles. See  figure  1. Do not force shelter when unfolding. Watch for entanglement of poles.

3. Grasp the webbing loop sewn on to the eye lit of the roof and pull up so the roof section pops up. See  figure  2.

4. Grasp the webbing loop sewn on to the eye lit located in the center of one of the walls and pull outward so
that wall pops open. See  figure  3.

5. Proceed by walking around entire shelter and pulling on each walls' sewn on webbing loop to pop out each
wall until all sides are popped out. See  figures  4  &  5.

6. Your shelter should be standing up completely as in figure  6. You may now proceed by anchoring the shelter
to the ice using the provided ice anchors and rope. Screw (4) anchors through the grommets located in each
corner completely. Use the (4) provided ropes and tie one end to the hub eye lit on each wall, and the other
end to an anchor that is already screwed completely into the ice several feet away. Use adjustment slides on
rope to achieve proper tension.

TAKE  DOWN  INSTRUCTIONS:

1. Remove all ropes and ice anchors and store them in the provided pouch. 

2. Leaving the door unzipped, push the center hub on any wall until it collapses inward. See  figure  7.

3. Continue pushing each wall inward until all walls are collapsed. Shelter will fall to the ice on its own.

4. Use your hand and push the hub of the roof inward until it collapses. See  figure  8.

5. Shelter will be back in its flat stage just as it was when it was unfolded out of the backpack bag. Gather all
corners of the shelter and fold together. See  figure  9. Do not force shelter when folding. Watch for 
entanglement of poles.

6. Place folded shelter back into the backpack carrying case with the hubs towards the bottom end of bag
always. Place the pouch with the ice anchors and rope into backpack as well.

SAFETY  &  MAINTENANCE  INSTRUCTIONS:

DO  NOT  USE  OPEN  FLAME  HEATERS  IN  YOUR  ICE  SHELTER.

Due to traffic on lakes, ice fishing can be hazardous at night. If you choose to fish at night or in conditions

with poor visibility, be sure to take precautions.

Never leave the ice shelter unattended.

Never put shelter away wet. Always put away dry, to avoid mildew.

Take down shelter when not in use to avoid unnecessary damage.

Use extra tie-downs during excessive winds.

LONG  TERM  STORAGE:

Make sure your Eskimo

®

ice shelter is completely dry before storing for long periods of time.

Store shelter in a cool dry place away from rodents

SHELTER  COMPONENETS:

(4) Tie down ropes (Part Number 48723) & (8) ice anchors (Part Number 69141)

QUICKFISH III

MODEL 69143

FIGURE 1

FIGURE 2

FIGURE 3

FIGURE 4

FIGURE 5

TM

Reviews: