Step 6
Connect the bracket and canopy rods to the
frames
You need:
•
2x clamping bracket
•
2x fully threaded screw
•
4x half thread screw
•
6x hanger nut
Tools
•
8 mm Allen key
•
13 mm open end wrench
Connect the straight stirrup bars to the
mounting bracket one after the other. Start
with the lower hole.
1.
Insert the semi-threaded screw from the
inside through the stirrup bar and the
connector.
2.
Stick nut
Repeat this step with the second straight stirrup bar at the middle hole
The canopy bar is connected to the highest hole, the clamping bracket and the fully threaded
screws.
1.
Place the clamping bracket between the canopy bar and the connector.
2.
Pass the fully threaded screw through the tensioning bracket-canopy bar-tensioning bracket.
3.
Stick nut
1
2
3
Then tighten well. The Allen key locks and the open-end wrench tightens.
Then tighten well. The Allen key locks and the open-end wrench tightens.
Detailed YouTube video
Lazy Tent - Assembly
11
