18
6.
Press the Pump 1 button a third time to turn Pump 1 off. A built-
in timer automatically turns Pump 1 off after 20 minutes, unless
the pump manually has been deactivated first.
7.
Press the Pump 2 button
. If Pump 2 has not primed after
3 minutes repeat same priming procedure of step 3 above for
Pump 1. Check and adjust the water and airflow of every jet
from Pump 2 if necessary.
8.
Press the Pump 2 button a second time to turn off Pump 2. A
built-in timer automatically turns Pump 2 off after 20 minutes,
unless the pump manually has been deactivated first.
9.
Press the Light button
to turn the spa Light on. Press this
button again to cycle through the five colors (red, blue, green,
white, and yellow). Once a desired color is found, pressing this
button again stays on this color.
10.
Press the Light button again to turn the spa Light off. A built-in
timer automatically turns the spa Light off after two hours,
unless the spa Light manually has been deactivated first.
11.
Press the Next Page button
.
12.
Press the Blower button
to turn on the air blower (if
equipped). Check that air goes to the air jets on the bottom of
each seat.
13.
Press the Blower button again to turn the Blower off. A built-in
timer automatically turns the Blower off after 20 minutes.
Note
: When temperature limits allow, a circulation pump and
ozone generator run continuously to help keep your water clean.
