diamond - User Manual
Version: 8.0.0/1
Exported on: 24 October, 2023
93
/
228
The operation of the Ambient Light Detectors (1) and Central Function Keys (3) are system-defined. The MF keys and rotary
controls (4) are defined by the configuration. The Central Rotary Controls (2) are configurable (when all Function Keys are
off) and system-defined (when a Function Key is selected).
The table below compares the Central and Combo modules. The differences are highlighted in
bold
.
Central Module
Combo Module
1
.
2 x ambient light detectors.
2 x ambient light detectors.
2
.
4 x small rotary controls
with label displays.
Each control has 4 x small MF keys.
2 x small rotary controls
* with label displays. Each control has 4 x
small MF keys.
3
.
16 x function keys.
16 x function keys.
4
.
40 x large MF keys
(in five blocks of 8).
2 x large rotary controls with label displays.
Each control has
3 x large MF keys
.
16 x large MF keys
(in two blocks of 8).
2 x large rotary controls with label displays. Each control has
2 x
large MF keys
.
* On a Combo module, the upper controls from the two fader strips are borrowed whenever a Function Key is active. This
ensures that, in this mode, there are four sets of Central Rotary Controls for system-defined functions.
The images below show the standard configuration for each module.
