LAWO diamond, User Manual

Page: 177 / 228

diamond - User Manual
Version: 8.0.0/1 Exported on: 24 October, 2023 177 / 228
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
EQ on – enables both the 3-band parametric EQ and 2-band Filters.
Dynamics on – enables the master on state for the dynamics: compressor, gate and expander.
The Status page provides a quick way to turn each of the following DSP modules on or off: EQ, Limiter, Dynamics and
Delay. In this instance, press a soft key to toggle the state of the DSP module.
The PGM and Aux pages can be used to adjust the bus assignments and aux send levels. The operation is identical to
the Bus Assign mode described earlier.
3. At any time you can switch to another page (from the Central Extension module).
4. When you have finished adjusting the parameters, turn off the page key (on the Central Extension module).
The Fader Extension controls return to their default functions. Note that, in the standard configuration, the controls go
blank as MF keys 6 to 9 have no function.
Source Parameter Control Pages
The "page" keys are configured using the “System -> Definition -> Parm -> Extension Ctrl Menu” branch of the ‘Tree
Definition’. You may have access to all pages, or a subset, depending on the number of MF keys available.
In the standard configuration, there are 12 pages as follows:
Input Pan – input and pan (LCR).
Input Back – additional input parameters including the Rumble Filter, PAD and N-1 level.
AGC – automix.
EQ – 3-band parametric EQ.
Filter – 2-band filters.
Comp – compressor.
Exp – expander.
Gate – gate.
DeEss – de-esser.
Lim Delay – limiter and delay.
Status - on/off for the EQ, Limiter, Dynamics and Delay.
PGM – bus assign for PGM 1-3 & Record.
Aux – bus assign for Aux 1-4.
Other pages that can be configured are:
Surr Pan – surround panning.
Bus # - additional bus assign pages.
VCA # - VCA assign pages.
Insert - insert parameters.