diamond - User Manual
Version: 8.0.0/1
Exported on: 24 October, 2023
146
/
228
•
•
•
Studio & Guest Monitoring
The images below show the functionality of the Central Rotary Controls defined by the standard
configuration.
Central Rotary Controls - Central Module
Central Rotary Controls - Combo Module
For the Studio and Guest outputs, there are two monitor source select keys: either
PGM 1
or
Soft
. The
Soft Select
key
works in the same way as for the CR and HP outputs: press and hold to pre-select a monitor source (from the GUI); press
quickly to monitor the assigned
source.
The other controls operate as follows:
Turn the rotary control to adjust the monitor volume.
Press
TB
to talk to the monitor output. The selected monitor source is dimmed by 20dB while talkback is active.
Press
Mute
to mute the Studio output. The output mutes automatically when the Mic Open status is active (i.e. a Mic
source fader is open).
PFL Monitoring
In the standard configuration, the PFL output is switched automatically to the headphones (HP) whenever a PFL is active.
The previous monitor source is re-instated once all active PFLs are cleared.
If
PFL
is selected (as a Contol Room monitor source), then PFL is switched to both outputs: HP and
CR.
The
Mon PFL
output can be connected to a separate PFL speaker, either by editing the default audio connections (using
ON-AIR Designer) or by making a connection from the 'Routing' page (on the GUI).
You can use the PFL master controls (on the Central or Combo module) to adjust the master PFL level or
Clear
all active
PFLs.
