diamond - User Manual
Version: 8.0.0/1
Exported on: 24 October, 2023
161
/
228
•
•
diamond - Using the System Snapshots
The eight system snapshots are stored on Power Core
and are
managed from the surface using
the
Save
and
Load
keys
(on the central controls module). They always save and load settings globally, and are ideal for tasks such as resetting the
console to a default starting point.
In the standard configuration,
an
Unlock
key
is configured to prevent accidental operation. This option can be disabled by
editing the configuration (via the "System -> Definition -> Parameter = Snapshots" branch of the 'Tree Definition'). In the
examples below, it is assumed that "Snap Unlock" is enabled.
Saving a Snapshot
The steps below describe how to save a system snapshot.
1.
Press and hold
Unlock
followed by
Save
.
The eight soft keys light up to show which memories are used:
Red = used.
Green = empty.
In the example below, snapshots 1 and 3 contain existing settings, while the others are free to use. If you select a used
memory, then its contents are overwritten.
2. Keep
holding
Save
and select a memory number - e.g.
4
.
The
Save
button flashes magenta to indicate a successful operation.
