Lavor SWL R 1300, Instructions And Operating Manual

Page: 47 / 292

47
CHAPTER 4 - WORK STATION AND CONTROLS
4.1. WORKPLACE POSITION
The workplace that must be occupied by the operator during use of the machine is only that shown in Figure
7 . Depending on the equipment, the workplace can be protected by a roll bar (A, Figure 7, no side protection)
or by a cab (B, Figure 7, side protection present) . Access to the workplace is facilitated by a platform (1,
Figure 7) . In the case of cab protection, access to and leaving of the workplace takes place by opening/closing
the door by means of the external/internal handle located in it (2, Figure 7) .
Figure 7
All the manual and pedal controls for use of the machine are located at the operator’s seat, as shown in Figure
8 .
Figure 8
IMPORTANT: For safety reasons, the machine switches off automatically if the operator
gets up from the driving position.