background image

precipitations and physical damages in accordance with the transportation rules applicable for every mode 
of transport. The product shall be securely fixed in the vehicle body in order to prevent any damages. The 
front side of the bathtub has to be protected. 
When transported by road, the bathtub in an undamaged original package shall be placed on the body 
floor. It is prohibited to carry out transportation of bathtubs in two tiers with no transportation cushions or 
place any other items on top of the installation system package. Stacking of the product, transportation in 
an upright position with the bathtub on its the side is also prohibited. The bathtub is a fragile product with 
considerable weight and dimensions, therefore, it shall be manually moved by at least two people. 
It is prohibited to move the bathtub manually by persons who have not reached the age of 18, pensioners 
and persons not allowed to lift weights due to health reasons. To move the bathtub, it is recommended to 
engage workers briefed for occupational safety and health rules during handling operations. 
In case the bathtub installation is not performed immediately after unpacking, the bathtub shall be placed 
on a dry, clean and even surface for temporary storage, eliminating any possibility of physical damage to 
the product. 

Terms of warranty 

The Manufacturer and the Seller guarantee normal operation of the bathtub, meeting the STB 1227-2000 
requirements, and its usability for the purpose intended within the warranty period. 
Warranty period for acrylic bathtubs is specified by the Seller in warranty card. The Manufacturer and the 
Seller shall have no warranty obligation (the warranty is cancelled) if any defects are detected due to 
improper mounting, unauthorized repair, negligent use, non-observance of rules for transportation, 
handling, use and care of the bathtub. Warranty obligations do not apply to wear parts – legs, frame and 
elements. 
The warranty does not cover normal wear and tear. 

Remounting and disposal of bathtub 

The bathtub is designed for single mounting. Remounting and use of the previously mounted and 
dismantled bathtub is prohibited. 
Disposal of the bathtub is carried out in accordance with the legislation of the state the product is 
mounted in. 

Other information 

There are no toxic pollutant emissions from the bathtub during its mounting and use. Our products have 
no harmful effect on human organism. 
The bathtub is not subject to obligatory certification. 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

Lavinia Boho 

Summary of Contents for Biore











Reviews: