Dear Customers!
Thank you for having chosen Lavinia Boho products.
Acrylic bathtubs are manufactured by vacuum molding method of environmentally friendly acrylic material
(100% PMMA), used by leading manufacturers of sanitary products in Europe and fully complying with
the requirements of STB 1227-2000. Products made of this material meet the highest consumer appeals:
high gloss; sanitary surface; easy to maintain; resistant to: UV radiation, fading, delamination, cracking;
harmless at contact with human body. The bathtub enforcement is made of high quality polyester resin,
with complete allowance for use in residential premises.
The Manufacturer reserves the right to make changes in the product characteristics and supply package
without prior notice to the Seller and the Customer, while maintaining the declared warranty period.
Product designation
The bathtub is to be installed in sanitary facilities of multifunctional buildings and intended for sanitary
and hygienic application.
Prior to mounting
Read carefully and follow these instructions in order to avoid any injuries and property damage.
Prior to installation, the bathtub shall be stored in an undamaged original package in dry and ventilated
location not less than 1 m from heating appliances. After storage and transportation of the bathtub at low
temperatures, it is required to keep the product at room temperature within the range from -20 to +40
degrees Celsius for at least 12 hours. In case of prior unpacking, all the components of the bathtub shall
be reliably packaged again in such a way as to avoid contamination and damage.
Do not put any items on the bathtub (even in case it is still in the package). The product is
subject to physical damage.
Installation of the bathtub shall be carried out by qualified sanitary technicians (unauthorized mounting and
repairs of the bathtub are prohibited). The installation procedure of the bathtub is specified in these
instructions for qualified sanitary technicians, and the operation procedure is described for the Customers.
Some physical efforts are required to fix the holding elements. However, avoid excessive physical efforts
as you may damage the bathtub or elements, suffer an injury or property damage. Please be extremely
careful while fixing the holding elements of the bathtub.
Check the bathtub for completeness before starting the mounting process. Remove all the
components from the package and store them at a designated place to prevent loss.
Preparatory works and complete set
These instructions have been developed for Customers from the Russian Federation, the Republic of
Belarus and the Republic of Kazakhstan. In the event the state adopts technical regulations governing
sanitary and technical works for bathtub installation, as well as preparatory works, then both the given
instructions and relevant provisions of technical regulations shall be followed.
Prior to bathtub installation, it is necessary to ensure complete and qualitative performance of all the
preparatory works (surface leveling, water supply, sewerage system operability, etc.).
Lavinia Boho
