Superabrasive
Owner’s Manual Original Language – Lavina
®
32R-S-E
11/2014
4
ENVIRONMENTAL CONDITIONS
The temperature range for operating the Lavina® 32R-S/32R-S-HV outdoors is between 41°F and 86°F or 5°C and
30°C. Never use the Lavina® 32R-S/32R-S-HV during rain or snow when working outdoors. When working
indoors, always operate the machine in well-ventilated areas.
ELECTRICAL CONNECTION
The voltage (Volt) and power (Ampere) are displayed on a label on the electrical control box to avoid any incorrect
connection. Refer to these before connecting the power. To avoid electrical shocks, make sure the ground power
supply is functioning properly.
VACUUM CONNECTION
A connection for a vacuum dust extractor is located on the carriage. The Lavina® 32R-S/32R-S-HV does not include a
vacuum dust extractor. The customer must purchase the vacuum dust extractor separately. The hose of the vacuum
extractor must be Ø 76mm/3in and can be glided over the three-way pipe. The vacuum dust extractor must be adapted for
floor grinders and have a minimum air displacement of 500m3/h with a negative vacuum of 21 kPa.
TECHNICAL DATA
CE-CERTIFICATION
The Lavina
®
32R-S-E machine is
designed to operate correctly in an
electromagnetic atmosphere of
industrial type and is equipped with
all the mechanical and electrical
safety protections in conformity
with the following European CEE
rules and regulations:
The Lavina
®
32R-S-E machine
complies with the Safety Directive
for machines 2006/42/EC, the EMC
Directive 2004/108/EC and the Low
Voltage Directive 2006/95/EC.
Also complies with the norms in
use BDS EN ISO 12100, BDS EN
13862,BDS EN ISO 13857, BDS
EN 349, BDS EN ISO 13850,BDS
EN 13732-1, BDS EN 953, BDS
EN ISO 13849-1,BDS EN 1037,
BDS EN ISO 5349-1, BDS EN ISO
11201, BDS EN ISO 3744,BDS EN
1033:2002, BDS EN 60204-1,BDS
EN 1837, BDS EN 61000-6-4, BDS
EN 61000-6-2, BDS EN 61000-4-2,
BDS EN 61000-4-4, BDS EN
61000-4-5,BDS EN 61000-4-11, BDS EN 55016-2-1
Test results are a part of the machine’s technical information and can be sent upon a special request. The machine is
delivered with the CE mark exposed and provided with a EC declaration of conformity.
VIBRATIONS
The measured vibration value on the surface of gripping in case of guiding the machine is a
hw
=2,67m/s
2
. The
measurement is made in accordance with the BDS EN ISO 1033 and BDS EN ISO 5349-1.
SONOROUS EMISSIONS
The maximum noise level at distance of the machine of 1m in case of working at idle does not exceed 70 dB(A). The
measurement is made in accordance with the BDS EN ISO 11201 and BDS EN ISO 3744.
LABEL DATA
The data on the label provides the correct voltage and kW (needed for operational purposes);
Weight (needed for transportation purposes); production year and serial number (needed for maintenance purposes).
CUSTOMER SERVICE
For customer assistance and technical support contact your local distributor or contact the producer Superabrasive Ltd.
or visit us at
www.superabrasive.com
, where you can download a copy of this manual.
Lavina
®
32R-S-E
Voltage/Hz
3ph x 380 V 50/60Hz
Amperage 31
Amps
Power
15.75 kW
21 hp
Tool holder rpm
300-1100 rpm
Working width
811mm
32”
Tool holder diameter
6 x 225 mm
6 x 9”
Weight
579 kg
1278lbs
Grinding pressure
286 kg
631 lbs
Additional weight
max 2x29kg
2x64 lbs
Application wet
and
dry
Vacuum hose port
76 mm
3”
Water attachment
Quick change for ¾” hose
Water tank capacity
46 l
12 gal
Water feed
Peripheral
and front stream with pump
Cable length
17.4 m
57 ft
Third wheel
yes
AMG Battery
12V/85AH
Duration of movement of the machine
without re-charging the battery
Max 30 minutes
Remote control battery
Rechargeable battery size AA 1.2V
Machine LxWxH
2335x850x1260 mm
92”x34”x50”
Packing LxWxH
1430x950x1280 mm
56”x37”x51”
