Superabrasive
Owner’s Manual Original Language – Lavina
®
32R-S-E
11/2014
7
FLIPPING THE MACHINE UP
To change the tools put the handle in the flipping (upright) position (Fig. 3.11), grab the steering bracket and pull the
machine with all your bodyweight down (one foot on the control box can help) Put the bracket down on the floor (Fig.
3.12) and change tools. While putting the machine down a foot on the control box helps again.
SPLITTING THE CARRIAGE FROM THE MAIN HEAD
Unplug the motor cable plug from the control box (Fig. 3.13) and disconnect the water hose from the main head by
pulling it out (Fig. 3.14 and Fig. 3.15). Release the sets of pins (Fig. 3.16) and dismantle the third wheel. Release the
pin sets (Fig. 3.17) which attach the head to the carriage and divide the carriage from the main head (Fig. 3.18).
LIFTING
Lifting the machine by crane is possible by using the hoisting ring mounted on
the carriage (see Fig.3.19). The eye bolt and machine construction is rated
only for the weight of the machine. Do not lift any other loads on the machine.
Use always hoisting equipment rated for 600 kg or 1300 lbs. See to it the
security pin (Fig. 3.9, Fig. 3.10) is mounted.
Figure 3.12
Figure 3.11
Figure 3.19
Figure 3.16
Figure 3.17
Figure 3.18
Figure 3.13
Figure 3.14
Figure 3.15
