4 USER'S
MANUAL
554515_A_PUB_DATE_1_FEB_2014.DOC
2. WARNINGS AND LABELS
TO MINIMIZE THE RISK OF FIRE, INJURY BY ELECTRIC SHOCK OR SERIOUS INJURIES TO PEOPLE
OR PROPERTY DAMAGE, PLEASE READ AND FOLLOW THE FOLLOWING INSTRUCTIONS:
– This English version is original language version. Without this original version, these instructions are incomplete.
– Before installation, operation and maintenance of the machine read carefully the complete instructions,
i.e. this „Installation, maintenance and user's manual“, „Programming manual“ and „Spare parts manual“.
The Programming manual and Spare parts manual are not delivered with a machine by default. You shall
ask the supplier / manufacturer to obtain Programming manual and Spare parts manual.
– Follow the instruction written in manuals and keep the manuals in a proper place by the machine for later use.
– The washer extractor is designed for fabrics washing only, other objects can damage the machine and can cause
damage or injuries.
– The manufacturer is not responsible for the damage to the fabrics that are washed by an inappropriate washing method.
– Always follow instructions and/or warnings that are stated on the fabrics, washing products or cleaning products
mentioned by the manufacturer.
– If the machine is used for special applications follow the instructions and warning to avoid person injury.
– Keep the washer extractor surface and surrounding clean and free of flammable materials.
– Do not put fabrics treated with flammable products in the washer extractor. Such fabrics must first be washed
by hand and air dried.
– Store laundry aids, dry-cleaning solvents and disinfectants out of the reach of children, preferably in a locked cabinet.
– Do not tamper the washer-extractor controls and follow the safety instructions and the warnings.
– Do not remove warning signs placed on the machine. Follow instructions on signs and labels to avoid personal
injuries.
– Do not use some means on the soap dispenser lid to hold it open by filling or when the machine operates.
The discharge or splashing of hazardous liquid can cause serious scalding and burning.
– The use of hypochlorite will cause corrosion which may cause component failure under certain circumstances.
– The warranty of the machine cannot be accepted in case corrosion was caused by chlorine and chlorine
compounds impact.
– Do not operate the washer extractor when parts are broken or missing or when covers are open.
The machine must not be operated until the fixed guards are put correctly in place.
– The washer extractor is not designed for work which may create an explosive atmosphere inside the machine
and will not be used for this purpose.
– In case of steam escaping anywhere in the machine, shut off the main steam supply valve and call for maintenance.
– Under certain conditions, hydrogen gas may be created in the hot water system that has not been used
for two or more weeks. Hydrogen gas is explosive. If the hot water system has not been used for such
period, open all hot water taps and let the water run out for few minutes. This will release any accumulated gas.
As this gas is flammable, do not smoke or use open flames during this time.
– In case of danger turn off the main switch or other emergency disconnection devices.
– Turn off the main water supply at the end of each operating day.
– Only qualified service personnel can execute service on the washer extractor.
– Follow all valid and basic safety rules and laws.
– It is obvious that it is impossible to mention each possible risk in this manual. It is up to the user to proceed
as careful as possible.
– The manufacturer reserves the right to change the manuals without previous notice.
– If a problem should arise, contact your dealer for assistance.
– Norm IEC335 is applied for machines with a net usable drum capacity between 60 and 150 l. Norm
EN60204-1 is used for a net usable drum capacity above 150 l.
WARNING!
IF THE INSTALLED APPLIANCE OPERATE WITH COIN, TOKEN OR SIMILAR OPERATION FOR USE
IN SELF-SERVICE SITUATIONS, THEN THE OWNER-INSTALLER MUST PROVIDE A REMOTE-LOCATED
EMERGENCY STOP DEVICE. THIS DEVICE MUST BE PLACED IN SUCH A WAY THAT IT IS EASY
AND SAFELY ACCESSIBLE FOR THE USERS. THE EMERGENCY STOP DEVICE TAKES CARE
THAT AT LEAST THE CONTROL CIRCUIT OF THE APPLIANCE IS INTERRUPTED.
!
Summary of Contents for LH-1000
Page 2: ......
