Pa
ge
9
8.
LIGHTING THE GAS GRATE MANUALLY
In the event of the Piezo ignitor not working properly, ignite the appliance with
a lighter or matches. In such cases, follow the Specific instructions below to
light the appliance manually.
Check that the gas supply to the Gas Grate is opened/turned-on.
Hold a lit match or barbecue lighter to the right hand side of the gas grate, next
to the Pilot Light and whilst holding the match or lighter in that position, push
the Control Knob in and turn
anti-clockwise
to the ignite. See figure 2.
Once the Pilot burner is lit, continue to hold the control knob in the pushed-in
position for 15-20 seconds, before turning the Control Knob in and
anti-
clockwise
direction to the required heat setting as described in Section 5.
9.
LIGHTING THE APPLIANCE FOR THE FIRST TIME
Before lighting the appliance for the first time, ensure that there are no gas
leaks and that a pressure test was done.
The installer is required to ignite the appliance in the presence of the
owner/user. The installer is obliged to instruct the owner/user in the safe
operation of the appliance and completed installation.
The position and operation of the isolating valve must be explained.
Installers are required to provide the owner/user with a completion certificate,
which must be signed and dated by both partied. Ensure that your
Name/Company name and SAQCC number appear on the certificate.
10.
TURNING OFF THE APPLIANCE
Turn the control knob CLOCKWISE (direction 9 o’clock). Do not press knob
inward in order to turn. The knob will stop as it hits the stopper.
At that point, press and hold down the knob and continue turning the knob
CLOCKWISE to OFF position (12 o’clock), then release the knob.