background image

 

Pa

ge

 

IMPORTANT: 

Read these instructions for use carefully so as to familiarise yourself with the appliance 
before connecting it to its gas container. Keep these instructions for future reference! 

1.

 

INTRODUCTION 

Below appliances conform to the requirements of 

SANS: 1539, LPGSA SA :  

FGD003 – Gas Vent Free (600 Pebble) | Permit Nr : 1250-2/3-RSA-17-A 
FGD004 – Gas Vent Free (900 Pebble) | Permit Nr : 1250-2/3-RSA-17-A 
FGD005 – Gas Vent Free (1120 Pebble) | Permit Nr : 1250-2/3-RSA-17-A 

WARNING! 

This appliance shall not be installed in enclosed bedrooms and bathrooms. 

WARNING! 

This is a flue-less gas fired heater. It uses air (oxygen) from the room in which it is installed.  
Provisions for adequate ventilation must be provided. Refer to the appropriate section of  
the user manual. 

WARNING! 

CARBON MONOXIDE POISONING CAN LEAD TO DEATH. 

Carbon Monoxide Poisoning: Early signs of carbon monoxide poisoning resemble the flue,  
with headaches, dizziness or nausea. If you have these signs, the heater may not be  
working properly. Get fresh air at once! Have the heater serviced. Some people are  
more affected by carbon monoxide than others. These include pregnant woman, people  
with heart or lung disease, or anemia, those under influence of alcohol and those at high  
altitudes. 

Summary of Contents for FGW 003













Reviews: