Lauda PROLINE P 5 C, Operating Instructions Manual

Page: 49 / 120

02/2022 Proline heating thermostat 49 / 123

Enter the desired limit temperature.

Accept the change with ,

or quit the window with without making
changes.
7.8.4 Setpoint offset operating mode
With this function it is possible to apply an offset value to the temperature provided by the external temperature probe
or a module and then to use it as the setpoint. The bath temperature can, for example, be operated at -25 °C below
the temperature of a reactor, which is being measured by the external temperature probe.
Master
SEtq.
3x to
MNEnu
to
PArA
5x

SEtq.
in the following submenu the relative setpoint (Set) and the
source of the actual value can be entered.
 Continue with .
 The offset operating mode is currently deactivated.
 To activate it press and with change to
EP
(external Pt100),
EA
(external via analog module) or
ES
(external via serial module).
Wait 4 seconds or

Display flashes 4 s

new value is automatically accepted, or
 value is immediately accepted with the Enter key.
 Continue with . The left-hand window is displayed.

To activate the relative offset input press and change the value with
or .
Wait 4 seconds or  Display flashes 4 s

new value is automatically accepted, or

value is immediately accepted with the Enter key.
Help Menu Screen T
set
T
fix
6 7 8 9 0
1 2 3 4 5
Lower limit (Til)
-50,
0
Min: -50,0 °C Max: 301,0 °C
SEtq.
°C
r 0FF
°C
r0FFS
°C