manualshive.com logo in svg

Lauda LRZ 926, Operation Manual, Page: 18 / 44

Share
Download
Lauda LRZ 926 Operation Manual Download Page 18

7  Operation

7.1 

Menu structure

The menu only ever shows functions that are available for the

current constant temperature equipment.

The menu for configuring the interface is integrated in the main menu of the

relevant constant temperature equipment:

Menu

 

 Modules

 

 Serial interface

Fig. 9: RS 232/485 interface menu

7.2  Interface functions

Interface functions such as read and write commands make it possible to

read out the current operating parameters of constant temperature equip-

ment and predefine specific settings and process values.
The interface functions supported by this interface are presented briefly

below. They are sorted by topic according to the component affected and

assigned a unique ID. Depending on the technical configuration of your

constant temperature equipment, the number and scope of the interface

functions actually available may vary from the list shown here, see chapter

"Availability of the interface functions".

7.2.1  General Information

Communication takes place according to the master/slave principle. In order

to ensure that a request and response are uniquely assigned to one another,

commands can only be sent to the constant temperature equipment once a

response to the previous command has been received.
All available read and write commands as well as the meaning of any error

messages that may occur are presented below. Note the following informa-

tion relating to syntax and sequencing when using these commands:

All operating units except for the master

V1

Interface module LRZ 926

18 / 43

Summary of Contents for LRZ 926













































Reviews:

No comments