DigiCal DCS 2
YAME0017/ 09.10.03
Handling / Introduction
15
2.4.5 Selection / Channel activation -
Bgl
To activate or deactivate a measuring channel press [ENTER/MENUE]. Use the up and down keys
[
] to select
BglK
and press [ENTER/MENUE]. On the left corner of the display appears a
small 1, which indicates the selected channel. For changing the channel use the up and down keys
[
]. Press [ENTER/MENUE] to confirm. The second display line shows
ml
for activation or
mEE
for deactivation. Use the up and down keys [
] again to activate
ml
or deactivate
mEE
the
requested measuring channel and press [ENTER/MENUE] to confirm.
Press [ESC] to get back to the measuring mode.
☞
−
In case that one channel would not be connected to a probe, the main display would
indicate
mODl
in the relevant line.
−
There must be at least one active channel!
Display
Keys
Function
Bgl
ENTER/MENUE
1
Bgl
2
Bgl
up and down keys [
]
select the channel 1 or 2
1
BglK
ENTER/MENUE
1
Bgl
ml
mEE
up and down keys [
]
activation or deactivation
ENTER/MENUE
To keep the amended value
ESC
To escape without retention
