DigiCal DCS 2
YAME0017/ 09.10.03
Handling / Introduction
17
2.5 Recalling the memory data (HOLD MAX MIN AVE)
After pressing first time the key [HOLD MAX MIN AVE] the actual value will be hold on the top
display line (big display). pressing again the key [HOLD MAX MIN AVE] the saved maximum-,
minimum and average value will be displayed in the bottom display line (small display).
☞
•
Note for 2-channel instruments: First the MAX-MIN-AVE-values of channel 1 will
be displayed – afterwards the values of the channel 2 will be displayed. Is there
only one probe on a 2-channel instrument we suggest to deactivate the channel
without probe.
(
þ
2.4.5 Selection / Channel activation - Chnl)
•
During the recall of the memory data the extremes (MAX MIN) and the average
value (AVE) will not be calculated or carried on.
Clearing the memory (MAX MIN AVE)
Press [CLEAR] key once to erase the stored maximum, minimum and average from memory. On the
display appears
Bp
.
After erasing the memory the instrument automatically switches back to measuring mode indicating
the actual measured value again.
2.6 Measuring rate (FAST-Mode)
Press [FAST/
] key one to change the measuring rate. Now the measuring rate is app. 4
measurements per second. Press [FAST/
] key again and the instrument is back in the standard
mode (1 measurement per second).
☞
In the fast mode the battery consumption is three times higher than in the standard
mode.
2.7 AUTO-OFF-Function
c@mE
= Disable Auto-off
D@mE
= Enable Auto-off
Press [ESC/AUTO-OFF] key again. On the display appears
c@mE
Now the Auto-Off-function is
deactivated.
Press [ESC/AUTO-OFF] key once. On the display appears
D@mE
Now the instrument switches off
automatically after app. 30 minutes.
☞
After switching off and on the instrument, the Auto-Off function is automatically
deactivated.
