CrossLink-NX PCIe Bridge Board Basic Demo
User Guide
© 2021 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at
All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
FPGA-UG-02145-1.0
43
7.3.2.
Problem with User Interface Launching
Go to the Demonstration/Linux directory. Check all content of this directory. Default content is shown in
. Check the permissions of these file.
Figure 7.6. Content List of Demonstration/Linux Directory.
The script files should have execute permission – to set permissions on the file, run the command below in the
terminal and try to run the application again.
sudo chmod 777 filename
If the user interface still does not launch, change directory into the Source_Code directory and verify that all files
are present in this directory, according to
Figure 7.7. Content List of Software/Linux Directory
If all files are present in this directory, change directory to app_src/gui/deploy and try to run the command below
directly.
sudo ./PCIe_Test_App.sh
