CrossLink-NX PCIe Bridge Board Basic Demo
User Guide
© 2021 Lattice Semiconductor Corp. All Lattice trademarks, registered trademarks, patents, and disclaimers are as listed at
All other brand or product names are trademarks or registered trademarks of their respective holders. The specifications and information herein are subject to change without notice.
12
FPGA-UG-02145-1.0
Figure 3.6. Device Properties Window for SPI Flash Programming
4.
Select the settings as shown in
5.
Click the Programming button from the menu bar shown in
to start programming.
Figure 3.7. Programmer Menu Bar
When the FPGA programming is successful, the output console shows an Operation Successful message as shown in
Figure 3.8. Programmer Output Window
If the programming operation was not successful, please refer to the troubleshooting section of this document.
After programming, power cycle the board and check the status LEDs on the board according to
