Lassen SQ GPS Receiver 2 1
Hardware Integration 2
2.2
Connectors
2.2.1
Digital IO/Power Connector
The Lassen SQ GPS module uses a single 8-pin (2x4) male header
connector for both power and data I/O. The power and I/O connector,
J2, is a surface mount micro terminal strip. This connector uses 0.09
inch (2.286mm) high pins on 0.05 inch (1.27mm) spacing. The
manufacturer of this connector is Samtec, part number
ASP 69533-01.
Note – See Appendix D for mechanical drawings and specifications.
Mating Connectors
The customer must supply his own mating connector to the Lassen SQ
GPS receiver 8-pin (2x4) connector. There are two mating connectors
available:
•
Surface-Mount Mating Connector
A recommended surface mount mating connector is Samtec’s
part number CLP-104-02.
When a surface-mount mating connector is chosen, the RF
connector must be attached to the Lassen SQ GPS module prior
to securing the module to the user’s PCB. The mounting tabs
may be used for securing the Lassen SQ GPS module to the
PCB when using the surface-mount mating scheme.
Summary of Contents for SQ
